Vegetation Management Attachments for Farmers & Contractors

Achieve the best protection for your farmland by trimming hedgerows. When you trim the branches regularly, the hedgerows become thicker. The crops will be shielded from wind damage and will flourish in the conditions.

It is recommended that you trim hedgerows in the autumn and winter periods. It is less likely that you will hurt the wildlife in the area as the bird nesting season is over.

You will also have greater visibility of what you are cutting as the leaves have fallen off the trees. In the winter, the ground may also become frozen which make it easy to drive the tractor or loader on the fields without leaving a trail of destruction.

View Our Attachments for Agriculture

Request A Quote

Download Brochure

Vegetation Management Tools for Farmers

Greentec Quadsaw LRS 2402

The Quadsaw LRS 2402 wields four circular blades with carbide tipped teeth that are extremely sharp and provide a smooth cut of branches and limbs up to 21 cm (8.27”) in thickness. The circular saw has many uses, such as trimming back hedgerows or maintaining paths and roads in forest areas.

Greentec Quadsaw LRS 2002

The Quadsaw LRS 2002 has an unmatched capacity with its four circular saw blades and low maintenance costs. The saw performs an excellent job at cutting thick and thin branches with a smooth and clean cut.

Greentec Quadsaw LRS 1602

The Quadsaw LRS 1602 is great for pruning branches in residential areas due to its low noise level compared to the larger models in the LRS series. The hydraulic limb saw has several other uses, such as forest maintenance and trimming of hedgerows on agricultural fields.

Greentec Quadsaw LRS 1402

The Quadsaw LRS 1402 is a small, yet powerful limb saw with four blades and a working width of 1.4 m (4’7″). The saw is designed for professional trimming of tree limbs and can cut branches up to 10 cm (3.94″) in thickness. The saw can be fitted on smaller vehicles, such as skid steer loaders and mini excavators, as it has a very low weight of 48 kg (106 lb).

Greentec Multi Carrier HXF 3302

The Multi Carrier HXF 3302 is the largest model in the HXF series and is mainly mounted on telehandlers, large front end loaders and backhoes.

Grass Cutterbar S 165 – 240

The sickle bar mower is used for cutting grass in inaccessible areas where a fine spread and chop of the cut off material is not required. The bar is mounted with powerful skids on the inside and outside which also acts as a straw divider. The cutterbar can be attached to excavators or boom arms to tractors.

Grass Cutterbar S 165 – 240

The sickle bar mower is used for cutting grass in inaccessible areas where a fine spread and chop of the cut off material is not required. The bar is mounted with powerful skids on the inside and outside which also acts as a straw divider. The cutterbar can be attached to excavators or boom arms to tractors.

Grass Cutterbar S 165 – 240

The sickle bar mower is used for cutting grass in inaccessible areas where a fine spread and chop of the cut off material is not required. The bar is mounted with powerful skids on the inside and outside which also acts as a straw divider. The cutterbar can be attached to excavators or boom arms to tractors.

Grass Cutterbar S 165 – 240

The sickle bar mower is used for cutting grass in inaccessible areas where a fine spread and chop of the cut off material is not required. The bar is mounted with powerful skids on the inside and outside which also acts as a straw divider. The cutterbar can be attached to excavators or boom arms to tractors.

Greentec Flail Mower FR 112

Our Flail Mowers FR 92 & 112 are highly effective for the care of green areas. They can be used for both grass mowing, hedge cutting and windbreak maintenance. Their core competency is verge mowing of grass and thicket.

Greentec Flail Mower FR 92

Our Flail Mowers FR 92 & 112 are highly effective for the care of green areas. They can be used for both grass mowing, hedge cutting and windbreak maintenance. Their core competency is verge mowing of grass and thicket.

Greentec Flail Mower FR 122 VB

The Flail Mower FR 122 VB is based on a standard FR 122 model, which is equipped with a hydraulically driven conveyor belt that throws the cut-off material away from the work area.

Greentec Flail Mower FR 162

The Flail Mower FR 122 & 162 are hydraulic driven and can be mounted on our Scorpion boom mowers for tractors or directly on the arm of diggers. We also offer a large selection of adapters and brackets for excavators and other manufactures of reach mowers.

Greentec Flail Mower FR 122

The Flail Mower FR 122 & 162 are hydraulic driven and can be mounted on our Scorpion boom mowers for tractors or directly on the arm of diggers. We also offer a large selection of adapters and brackets for excavators and other manufactures of reach mowers.

Greentec Cutterbar HX 270

Our HX series consists of powerful and effective finger bars for professional hedge and tree trimming. The finger bars provide a clean cut of branches up to 11 cm (4.33”) in thickness. The bars do not leave split or flayed branches.

Greentec Quadsaw

A Greentec Quadsaw is a smart investment for farmers maintaining windbreaks. Its efficiency streamlines pruning and trimming, ensuring dense, effective windbreaks that shield crops and livestock from strong winds. Time savings are substantial, reducing labor and freeing resources for other essential farm tasks. Versatility makes it suitable for initial planting and ongoing windbreak care. Though the initial cost may be significant, the Quadsaw offers long-term financial benefits through reduced labor and improved windbreak effectiveness. Crop yields benefit from enhanced wind protection, and soil erosion is curbed, preserving valuable topsoil. Safety features and environmental considerations further solidify the Quadsaw’s value as a farm asset.

Greentec LRS 2402 Twinsaw

Greentec LRS 2402 Twinsaw

All branches receive a smooth and even cut by the eight circular blades with carbide tipped teeth. It is a great solution for trimming back trees and hedgerows in agricultural areas or maintaining large forest territories.

Greentec LRS 2402 Twinsaw

Greentec LRS 2002 Twinsaw

All branches receive a smooth and even cut by the eight circular blades with carbide tipped teeth. It is a great solution for trimming back trees and hedgerows in agricultural areas or maintaining large forest territories.

Greentec Quadsaw LRS 2402

The Quadsaw LRS 2402 wields four circular blades with carbide tipped teeth that are extremely sharp and provide a smooth cut of branches and limbs up to 21 cm (8.27”) in thickness. The circular saw has many uses, such as trimming back hedgerows or maintaining paths and roads in forest areas.

Greentec Quadsaw LRS 2002

The Quadsaw LRS 2002 has an unmatched capacity with its four circular saw blades and low maintenance costs. The saw performs an excellent job at cutting thick and thin branches with a smooth and clean cut.

Greentec Quadsaw LRS 1602

The Quadsaw LRS 1602 is great for pruning branches in residential areas due to its low noise level compared to the larger models in the LRS series. The hydraulic limb saw has several other uses, such as forest maintenance and trimming of hedgerows on agricultural fields.

Greentec Quadsaw LRS 1402

The Quadsaw LRS 1402 is a small, yet powerful limb saw with four blades and a working width of 1.4 m (4’7″). The saw is designed for professional trimming of tree limbs and can cut branches up to 10 cm (3.94″) in thickness. The saw can be fitted on smaller vehicles, such as skid steer loaders and mini excavators, as it has a very low weight of 48 kg (106 lb).

Greentec Reach Arms

Investing in a Greentec reach arm can greatly benefit farmers and property owners. Its extended reach and versatility make it a valuable tool for various property management tasks, including tree trimming and maintenance. Safety is enhanced as operators can work from a safe distance, reducing the risk of accidents. Increased efficiency not only saves time but also enhances overall land use productivity. Cost savings result from reduced labor and equipment wear. Access to challenging areas expands the scope of property management tasks. Eco-friendly options reduce environmental impact, while improved aesthetics and reduced fire risk add to its appeal. Compliance with regulations further solidifies its value as an essential property maintenance tool.

Greentec Spider 820 PLUS Reach Mower

The Spider 820 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers; it is suitable for roadside maintenance, hedge cutting, and tree trimming. It is a highly flexible solution where you can easily change the position of the arm for working on either the right or left side of the road, and the arm can be extended forward so the attachment tool is always visible to the driver.

The Spider 820 PLUS can be rear‑mounted on large tractors with a weight of at least 8,000 kg (17,637 lb).

Greentec Spider 720 PLUS Reach Mower

The Spider 720 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming; and is a highly flexible solution where the arm can be positioned either to the right or left side of the tractor and extended forward so the attachment tool is always visible to the driver.

Spider 720 PLUS can be front‑ or rear‑mounted on medium‑to‑large tractors with a weight of at least 7,000 kg (15,432 lb).

Greentec Spider 620 PLUS Reach Mower

The Spider 620 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, hedge cutting, and tree trimming; and is a highly flexible solution where you can easily change the arm position to work on either the right or left side of the road. The arm can be extended forward so the attachment tool is always visible to the driver.

Spider 620 PLUS can be front‑ or rear‑mounted on medium‑sized tractors with a weight of at least 6,000 kg (13,228 lb).

Greentec Spider 520 PLUS Reach Mower

The Spider 520 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers, suitable for roadside maintenance, hedge cutting, and tree trimming. It is a highly flexible solution — the arm can be positioned for working on either the right or left side of the road and can extend forward so the attachment tool is always visible to the driver.

The Spider 520 PLUS can be front‑ or rear‑mounted on medium‑sized tractors with a weight of at least 5,000 kg (11,023 lb).

Greentec Scorpion 830-8 Plus Reach Mower - Rear Mounted

Greentec Scorpion 830-8 Plus Reach Mower – Rear Mounted

The Scorpion 830 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers, is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming, and is designed for large tractors with a minimum operating weight of 8,000 kg (17,637 lb), using a four‑point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 830-8 Plus Reach Mower - Rear Mounted

Greentec Scorpion 730-8 Plus Reach Mower – Rear Mounted

The Scorpion 730 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers, is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming, and is designed for large tractors with a weight of at least 7,000 kg (15,432 lb), using a four‑point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 830-8 Plus Reach Mower - Rear Mounted

Greentec Scorpion 830-8 S Reach Mower – Rear Mounted

The Scorpion 830 S is a professional boom mower designed for municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming; and is designed for large tractors weighing at least 8,000 kg (17,637 lb), using a four‑point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 830-8 Plus Reach Mower - Rear Mounted

Greentec Scorpion 730-8 S Reach Mower – Rear Mounted

The Scorpion 730 S is a professional boom mower designed for municipalities, agricultural contractors, forest workers, and landscapers, is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming, and is designed for large tractors weighing at least 7,000 kg (15,432 lb), using a four‑point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 630-6 Plus Reach Mower – Rear Mounted

The Scorpion 630 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers, is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming, and is designed for medium-sized tractors with a minimum operating weight of 5,000 kg (11,023 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 530-6 Plus Reach Mower – Rear Mounted

The Scorpion 530 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming; and is designed for medium‑sized tractors weighing at least 4,000 kg (8,819 lb), using a four‑point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 630-6 S Reach Mower – Rear Mounted

The Scorpion 630 S is a professional boom mower designed for municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming; and is designed for medium-sized tractors weighing at least 5,000 kg (11,023 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 530-6 S Reach Mower – Rear Mounted

The Scorpion 530 S is a professional boom mower designed for municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming; and is designed for medium‑sized tractors weighing at least 4,000 kg (8,819 lb), using a four‑point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 430-4 Plus Reach Mower – Front Mounted

The Scorpion 430 PLUS is a professional boom mower designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers, is suitable for limited-space operations such as verge mowing on bike paths and hedge trimming in residential areas, can also be used for trimming trees on narrow forest tracks and maintaining hedgerows in agricultural fields, and is designed for small tractors weighing at least 2,200 kg (4,850 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 330-4 Plus Reach Mower – Front Mounted

The Scorpion 330 PLUS is a professional boom mower designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers, is suitable for limited-space operations such as verge mowing on bike paths and hedge trimming in residential areas, can also be used for trimming trees on narrow forest tracks and maintaining hedgerows in agricultural fields, and is designed for small tractors weighing at least 1,650 kg (3,638 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 430-4 S Reach Mower – Front Mounted

The Scorpion 430 S is a professional boom mower designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers, is suitable for limited-space operations such as verge mowing on bike paths and hedge trimming in residential areas, can also be used for trimming trees on narrow forest tracks and maintaining hedgerows in agricultural fields, and is designed for small tractors weighing at least 2,000 kg (4,409 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 330-4 S Reach Mower – Front Mounted

The Scorpion 330 S is designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers, is suitable for working in limited spaces such as verge mowing on bike paths and hedge trimming in residential areas, is also capable of trimming trees on narrow forest trails and maintaining hedgerows in fields, and is intended for use with small tractors with a minimum weight of 1,500 kg (3,307 lb), using a four-point mounting system on the mainframe for faster and more reliable installation.

Greentec Scorpion 430-4 Plus Basic Reach Mower – Front Mounted

The Scorpion 430 PLUS – Basic Front is a professional boom mower designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers, is suitable for limited-space operations such as verge mowing on bike paths and hedge trimming in residential areas, can also be used for trimming trees on narrow forest tracks and maintaining hedgerows in agricultural fields, and is designed for loaders weighing at least 3,000 kg (6,614 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 430-4 S Basic Reach Mower – Front Mounted

The Scorpion 430 S – Basic Front is a professional boom mower designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers; is suitable for limited-space operations such as verge mowing on bike paths and hedge trimming in residential areas; can also be used for trimming trees on narrow forest tracks and maintaining hedgerows in agricultural fields; and is designed for loaders weighing at least 3,000 kg (6,614 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 330-4 Plus Basic Reach Mower – Front Mounted

The Scorpion 330 PLUS – Basic Front is a professional boom mower designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers, is suitable for limited-space operations such as verge mowing on bike paths and hedge trimming in residential areas, can also be used for trimming trees on narrow forest tracks and maintaining hedgerows in agricultural fields, and is designed for loaders weighing at least 2,250 kg (4,960 lb), using a four-point mounting system on the mainframe for fast and reliable installation.

Greentec Scorpion 330-4 S Basic Reach Mower – Front Mounted

The Scorpion 330 S – Basic Front is a professional boom mower designed for municipalities, agricultural contractors, forest workers, gardeners, and landscapers; is suitable for limited‑space operations such as verge mowing on bike paths and hedge trimming in residential areas; can also be used for trimming trees on narrow forest tracks and maintaining hedgerows on agricultural fields; and is designed for loaders weighing at least 2,250 kg (4,960 lb), using a four‑point mounting system on the mainframe for fast and reliable installation.

Greentec Leaf Blower LG

The Leaf Blower LG is used for keeping roads, sidewalks and bike paths free of leaves, grass and other debris. The machine is often used in combination with a hedge trimmer or flail mower. It enables you to cut hedges, shrubs and grass in verges while cleaning up the mess on the fly. It eliminates the need for manual labor to remove the cut-off material from the road.

Niubo Mulcher

The Niubo forestry mulchers offers substantial benefits for farmers engaged in vegetation management. It efficiently clears dense vegetation, simplifying land preparation and maintenance tasks. Safety is enhanced as operators work at a safe distance from mulching activities, reducing the risk of accidents. Versatility allows it to tackle various vegetation types and terrains, making it a valuable tool for diverse farming needs. Improved efficiency translates into potential labor cost savings, boosting overall farm profitability. Some models offer eco-friendly features, like reduced emissions or natural mulching capabilities, which align with sustainable farming practices. Furthermore, effective vegetation mulching reduces the risk of wildfires, enhancing overall farm safety and productivity.

No results found.