07 5315 8020

Products

View Filters
Reset
Virnig X30 Mini Excavator Rotary Brush Cutter

Cut up to 4″ diameter trees and access hard to reach areas for a maintained finish.

  • NO CASE DRAIN REQUIRED. DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVE PROTECTION
  • UNIQUE BOLT-ON FRONT DECK. REMOVE FOR 270-DEGREE BLADE ENGAGEMENT
  • BOLT-ON MOUNTING INTERFACE FOR QUICKLY CHANGING HANGER BRACKETS
  • ROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
  • SERRATED REAR DECK FOR BACK DRAGGING BRUSH & GRUBBING STUMPS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • VARIOUS HANGER BRACKETS AVAILABLE TO FIT MOST EXCAVATOR BRANDS

NOTE: Hanger bracket not included.

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V70 Tree Disc Mulcher

Efficiently mulch 6-8” diameter trees and quickly cut up to 14” diameter trees.

  • BENT-AXIS PISTON MOTOR WITH RELIEF VALVES
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • 60″ FULLY-MACHINED PERFECTLY BALANCED QUADCO® DISC
  • BOLT-ON STEEL TOOTH MOUNTS WITH FOUR-SIDED ROTATABLE & REPLACEABLE TEETH (CARBIDE TEETH AVAILABLE)
  • 3 DECK MOUNTED TEETH & RECUTTER BAR FOR A FINER FINISH
  • 3/8″ GRADE 80 INTERIOR DECK WELDMENT
  • REPLACEABLE PUSH BAR, CHUTE & DEFLECTOR
  • TWO CHUTE STYLES Choose from two chute styles; standard or open. See options tab for details.

Requires a high flow loader with a flow rate of 30-50 GPM. Max operating pressure is 4,200 PSI. DO NOT OPERATE MULCHER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V70 Drum Mulcher

Efficiently turn 14″ diameter trees and vegetation into a fine mulch and grind stumps below grade.

  • FIXED & VARIABLE SPEED BENT-AXIS PISTON MOTOR OPTIONS. VARIABLE MOTOR PROVIDES MORE TORQUE FOR PRODUCTIVE STUMP GRINDING & MULCHING BELOW GRADE
  • FACTORY TUNED TO THE LOADER FOR OPTIMAL DRUM RPM — NO MOTOR ADJUSTMENT OR SERVICE TECHS REQUIRED
  • 18″ PERFECTLY BALANCED QUADCO® DRUM WITH FULLY ENCLOSED GREASEABLE BEARINGS (VIEW DRUM ROTOR GUIDE)
  • ANTI-WRAP DRUM PLATES PROVIDE WIRE & DEBRIS ENTANGLEMENT PROTECTION
  • INTERCHANGEABLE QUADCO® BOLT-ON STEEL & CARBIDE TOOTH OPTIONS (VIEW TOOTH GUIDE)
  • AR400 BOLT-ON SKID SHOES, ADJUSTABLE PUSH BAR & REPLACEABLE AR400 WEAR LINER
  • ADJUSTABLE BOTTOM BITE PLATE TO CONTROL MATERIAL DISCHARGE SIZE
  • SPINDLE LOW PRESSURE OIL VENT SAFEGUARDS BEARING ADAPTER SEALS IF MOTOR SEALS FAIL
  • CASE DRAIN CONNECTION INDICATOR PROVIDES VISUAL CONFIRMATION OF FUNCTIONING CASE DRAIN
  • REAR CHAIN CURTAIN REDUCES DEBRIS THROWN TOWARD LOADER & OPERATOR

Requires a high flow loader with a flow rate of 30-50 GPM. Max operating pressure is 4,200 PSI. DO NOT OPERATE MULCHER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V70 Open Front Rotary Brush Cutter

Capable of cutting up to 8″ trees, this high performance brush cutter provides faster blade tip speed, quick spin up, and rapid recovery.

  • BENT-AXIS PISTON MOTOR WITH RELIEF VALVES ENSURES RAPID FLYWHEEL SPIN UP & RECOVERY, REACHING FULL SPEED IN 13 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • CIRCULAR FLYWHEEL WITH 4 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
  • REPLACEABLE AR400 FRONT SKID SHOES & BOLT-ON AR400 BOTTOM DECK RUNNERS
  • SPINDLE LOW PRESSURE OIL VENT SAFEGUARDS BEARING ADAPTER SEALS IF MOTOR SEALS FAIL
  • CASE DRAIN CONNECTION INDICATOR PROVIDES VISUAL CONFIRMATION OF FUNCTIONING CASE DRAIN

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

NO HYDRAULIC BRAKING – FLYWHEEL MAY TAKE MINUTES TO COME TO A COMPLETE STOP.

View More
Virnig V60 Open Front Rotary Brush Cutter

Cuts up to 8″ diameter trees. Top of the line cutter with more blades, heavier flywheel and industrial grade components to handle the most demanding jobs.

  • FIVE DIRECT DRIVE MOTOR OPTIONS WITH RELIEF VALVES. EATON® HIGH FLOW MOTORS RATED FOR MAX PRESSURE OF 4100 PSI & SAI® PISTON MOTOR UP TO 4500 PSI
  • HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 25 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • CIRCULAR FLYWHEEL WITH 4 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
  • REPLACEABLE AR400 FRONT SKID SHOES & BOLT-ON AR400 BOTTOM DECK RUNNERS

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V50 Open Front Rotary Brush Cutter

Cuts up to 6″ diameter trees and exposed blades allow faster cutting for a maintained finish.

  • FIVE DIRECT DRIVE MOTOR OPTIONS WITH RELIEF VALVES. EATON® HIGH FLOW MOTORS RATED FOR MAX PRESSURE OF 4100 PSI & SAI® PISTON MOTOR UP TO 4500 PSI
  • HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • ROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
  • REPLACEABLE FRONT SKID SHOES

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V50 Floating Deck Rotary Brush Cutter

Cuts up to 4″ diameter trees and floating deck provides a consistent cut on uneven terrain.

  • FLOATING DECK FOLLOWS THE CONTOUR OF THE GROUND
  • FIVE DIRECT DRIVE MOTOR OPTIONS WITH RELIEF VALVES. EATON® HIGH FLOW MOTORS RATED FOR MAX PRESSURE OF 4100 PSI & SAI® PISTON MOTOR UP TO 4500 PSI
  • HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • CIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS
  • CHAIN CURTAIN PREVENTS FLYING DEBRIS
  • REPLACEABLE FRONT SKID SHOES

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V50 Closed Front Rotary Brush Cutter

Cuts up to 4″ diameter trees and clears grass and brush for a consistent finished look.

  • FIVE DIRECT DRIVE MOTOR OPTIONS WITH RELIEF VALVES. EATON® HIGH FLOW MOTORS RATED FOR MAX PRESSURE OF 4100 PSI & SAI® PISTON MOTOR UP TO 4500 PSI
  • HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • CIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS
  • CHAIN CURTAIN PREVENTS FLYING DEBRIS
  • REPLACEABLE FRONT SKID SHOES

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V40 Open Front Rotary Brush Cutter

Cuts up to 3″ diameter trees and exposed blades allow faster cutting for a maintained finish.

  • DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVES
  • HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • CIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Virnig V40 Closed Front Rotary Brush Cutter

Cuts up to 3″ diameter trees and clears grass and brush for a consistent finished look.

  • DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVES
  • HYDRAULIC BRAKING STOPS FLYWHEEL IN LESS THAN 10 SECONDS
  • STANDARD MOTOR GUARD & SPINDLE GUARD
  • CIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS

DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON LOADER.

View More
Greentec Spider 820 PLUS Reach Mower

The Spider 820 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers; it is suitable for roadside maintenance, hedge cutting, and tree trimming. It is a highly flexible solution where you can easily change the position of the arm for working on either the right or left side of the road, and the arm can be extended forward so the attachment tool is always visible to the driver.

The Spider 820 PLUS can be rear‑mounted on large tractors with a weight of at least 8,000 kg (17,637 lb).

View More
Greentec Spider 720 PLUS Reach Mower

The Spider 720 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, verge mowing, hedge cutting, and tree trimming; and is a highly flexible solution where the arm can be positioned either to the right or left side of the tractor and extended forward so the attachment tool is always visible to the driver.

Spider 720 PLUS can be front‑ or rear‑mounted on medium‑to‑large tractors with a weight of at least 7,000 kg (15,432 lb).

View More
Greentec Spider 620 PLUS Reach Mower

The Spider 620 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers; is suitable for roadside maintenance, hedge cutting, and tree trimming; and is a highly flexible solution where you can easily change the arm position to work on either the right or left side of the road. The arm can be extended forward so the attachment tool is always visible to the driver.

Spider 620 PLUS can be front‑ or rear‑mounted on medium‑sized tractors with a weight of at least 6,000 kg (13,228 lb).

View More
Greentec Spider 520 PLUS Reach Mower

The Spider 520 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers, and landscapers, suitable for roadside maintenance, hedge cutting, and tree trimming. It is a highly flexible solution — the arm can be positioned for working on either the right or left side of the road and can extend forward so the attachment tool is always visible to the driver.

The Spider 520 PLUS can be front‑ or rear‑mounted on medium‑sized tractors with a weight of at least 5,000 kg (11,023 lb).

View More
Greentec FOX Multi Carrier

The Multi Carrier FOX is specially developed to carry our Barrier Mower RI 60 & 82. It is an ideal solution for people who are interested in mowing grass under horse fences, guardrails or around trees in orchards.

The arm on the FOX can be adjusted to the terrain if you want a shorter or longer range. The FOX has many mounting options as it can be either front or rear mounted on tractors through category 1 or 2. The FOX can also be front mounted on loaders.

View More