Vegetation Management Attachments for Farmers & Contractors

Achieve the best protection for your farmland by trimming hedgerows. When you trim the branches regularly, the hedgerows become thicker. The crops will be shielded from wind damage and will flourish in the conditions.

It is recommended that you trim hedgerows in the autumn and winter periods. It is less likely that you will hurt the wildlife in the area as the bird nesting season is over.

You will also have greater visibility of what you are cutting as the leaves have fallen off the trees. In the winter, the ground may also become frozen which make it easy to drive the tractor or loader on the fields without leaving a trail of destruction.

View Our Attachments for Agriculture

Request A Quote

Download Brochure

Vegetation Management Tools for Farmers

Greentec Spider 820 PLUS Reach Mower

Our Spider 820 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers and landscapers. A large selection of tools can be attached to the Spider boom mower for roadside maintenance, hedge cutting and tree trimming.

The Spider 820 PLUS is a highly flexible solution. You can easily change the position of the arm from either working in the right or left side of the road. The arm can be extended forward so the attachment tool is always visible to the driver. The Spider 820 PLUS can be rear mounted on large tractors with a weight of at least 8,000 kg (17,637 lb).

Greentec Spider 720 PLUS Reach Mower

Our Spider 720 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers and landscapers. A large selection of tools can be attached to the Spider boom mower for roadside maintenance, hedge cutting and tree trimming.

The Spider 720 PLUS is a highly flexible solution. You can easily change the position of the arm from either working in the right or left side of the road. The arm can be extended forward so the attachment tool is always visible to the driver. The Spider 720 PLUS can be rear mounted on large tractors with a weight of at least 7,000 kg (15,432 lb).

Greentec Spider 620 PLUS Reach Mower

Our Spider 620 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers and landscapers. A large selection of tools can be attached to the Spider boom mower for roadside maintenance, hedge cutting and tree trimming.

The Spider 620 PLUS is a highly flexible solution. You can easily change the position of the arm from either working in the right or left side of the road. The arm can be extended forward so the attachment tool is always visible to the driver. The Spider 620 PLUS can be front or rear mounted on medium-sized tractors with a weight of at least 6,000 kg (13,228 lb).

Greentec Spider 520 PLUS Reach Mower

Our Spider 520 PLUS is a professional boom mower used by municipalities, agricultural contractors, forest workers and landscapers. A large selection of tools can be attached to the Spider boom mower for roadside maintenance, hedge cutting and tree trimming.

The Spider 520 PLUS is a highly flexible solution. You can easily change the position of the arm from either working in the right or left side of the road. The arm can be extended forward so the attachment tool is always visible to the driver. The Spider 520 PLUS can be front or rear mounted on medium-sized tractors with a weight of at least 5,000 kg (11,023 lb).

Greentec FOX Multi Carrier

The Multi Carrier FOX is specially developed to carry our Barrier Mower RI 60 & 82. It is an ideal solution for people who are interested in mowing grass under horse fences, guardrails or around trees in orchards.

The arm on the FOX can be adjusted to the terrain if you want a shorter or longer range. The FOX has many mounting options as it can be either front or rear mounted on tractors through category 1 or 2. The FOX can also be front mounted on loaders.

Greentec Multi Carrier HXF 3302 Tele

Our Multi Carrier HXF 3302 Tele offers great flexibility as you can adjust the arm to the terrain. It is an ideal solution for working in conditions with limited space, such as forest tracks, bike paths and orchards.

The Multi Carrier HXF 3302 Tele is the largest model in the HXF series and is mainly mounted on telehandlers, large front end loaders and excavators. An extensive range of tools for hedge cutting and tree trimming can quickly be attached or detached to the frame.

Greentec Multi Carrier HXF 2802 Tele

Our Multi Carrier HXF 2802 Tele offers great flexibility as you can adjust the arm to the terrain. It is an ideal solution for working in conditions with limited space, such as forest tracks, bike paths and orchards.

The Multi Carrier HXF 2802 Tele can be installed on front end loaders and large skid steer loaders in a few minutes. A large selection of tools for hedge cutting and tree trimming is available. It is also possible to mount a barrier mower or weed brush on the frame.

Greentec RI80 Barrier Mower

The Barrier Mower RI 60 & 80 is the ideal solution for maintenance of fence lines, guardrails, orchards and vineyards. The fence line mower goes around every obstacle whether that be fence posts, crash barriers or trees.

Greentec RI60 Barrier Mower

Greentec LRS 2402 Twinsaw

All branches receive a smooth and even cut by the eight circular blades with carbide tipped teeth. It is a great solution for trimming back trees and hedgerows in agricultural areas or maintaining large forest territories.

Greentec LRS 2002 Twinsaw

Greentec Scorpion 830-8 Plus Reach Mower – Rear Mounted

We have truly created a groundbreaking product with our Scorpion arm mower which has been awarded a silver medal in innovation by the Agritechnica Commission. The Scorpion boom mowers are designed for contractors and farmers who maintain large green areas.

Greentec Scorpion 730-8 Plus Reach Mower – Rear Mounted

Greentec Scorpion 830-8 S Reach Mower – Rear Mounted

Greentec have truly created a groundbreaking product with theur Scorpion arm mower which has been awarded a silver medal in innovation by the Agritechnica Commission. The Scorpion boom mowers are designed for contractors and farmers who maintain large green areas.

Greentec Scorpion 730-8 S Reach Mower – Rear Mounted

Greentec truly created a groundbreaking product with Their Scorpion arm mower which has been awarded a silver medal in innovation by the Agritechnica Commission. The Scorpion boom mowers are designed for contractors and farmers who maintain large green areas.

Greentec Quadsaw

A Greentec Quadsaw is a smart investment for farmers maintaining windbreaks. Its efficiency streamlines pruning and trimming, ensuring dense, effective windbreaks that shield crops and livestock from strong winds. Time savings are substantial, reducing labor and freeing resources for other essential farm tasks. Versatility makes it suitable for initial planting and ongoing windbreak care. Though the initial cost may be significant, the Quadsaw offers long-term financial benefits through reduced labor and improved windbreak effectiveness. Crop yields benefit from enhanced wind protection, and soil erosion is curbed, preserving valuable topsoil. Safety features and environmental considerations further solidify the Quadsaw’s value as a farm asset.

Greentec LRS 2402 Twinsaw

Greentec LRS 2002 Twinsaw

Greentec Quadsaw LRS 2402

The Quadsaw LRS 2402 wields four circular blades with carbide tipped teeth that are extremely sharp and provide a smooth cut of branches and limbs up to 21 cm (8.27”) in thickness. The circular saw has many uses, such as trimming back hedgerows or maintaining paths and roads in forest areas.

Greentec Quadsaw LRS 2002

The Quadsaw LRS 2002 has an unmatched capacity with its four circular saw blades and low maintenance costs. The saw performs an excellent job at cutting thick and thin branches with a smooth and clean cut.

Greentec Quadsaw LRS 1602

The Quadsaw LRS 1602 is great for pruning branches in residential areas due to its low noise level compared to the larger models in the LRS series. The hydraulic limb saw has several other uses, such as forest maintenance and trimming of hedgerows on agricultural fields.

Greentec Quadsaw LRS 1402

The Quadsaw LRS 1402 is a small, yet powerful limb saw with four blades and a working width of 1.4 m (4’7″). The saw is designed for professional trimming of tree limbs and can cut branches up to 10 cm (3.94″) in thickness. The saw can be fitted on smaller vehicles, such as skid steer loaders and mini excavators, as it has a very low weight of 48 kg (106 lb).

Greentec Reach Arms

Investing in a Greentec reach arm can greatly benefit farmers and property owners. Its extended reach and versatility make it a valuable tool for various property management tasks, including tree trimming and maintenance. Safety is enhanced as operators can work from a safe distance, reducing the risk of accidents. Increased efficiency not only saves time but also enhances overall land use productivity. Cost savings result from reduced labor and equipment wear. Access to challenging areas expands the scope of property management tasks. Eco-friendly options reduce environmental impact, while improved aesthetics and reduced fire risk add to its appeal. Compliance with regulations further solidifies its value as an essential property maintenance tool.

Greentec Spider 820 PLUS Reach Mower

Greentec Spider 720 PLUS Reach Mower

Greentec Spider 620 PLUS Reach Mower

Greentec Spider 520 PLUS Reach Mower

Greentec Scorpion 830-8 Plus Reach Mower – Rear Mounted

Greentec Scorpion 730-8 Plus Reach Mower – Rear Mounted

Greentec Scorpion 830-8 S Reach Mower – Rear Mounted

Greentec Scorpion 730-8 S Reach Mower – Rear Mounted

Greentec Scorpion 630-6 Plus Reach Mower – Rear Mounted

Our Scorpion boom mowers have many innovative features that provide environmentally and economically benefits for the user while increasing the driving experience and road safeness.

Greentec Scorpion 530-6 Plus Reach Mower – Rear Mounted

Greentec’s Scorpion boom mowers have many innovative features that provide environmentally and economically benefits for the user while increasing the driving experience and road safeness.

Greentec Scorpion 630-6 S Reach Mower – Rear Mounted

Our Scorpion boom mowers have many innovative features that provide environmentally and economically benefits for the user while increasing the driving experience and road safeness.

Greentec Scorpion 530-6 S Reach Mower – Rear Mounted

Greentec’s Scorpion boom mowers have many innovative features that provide environmentally and economically benefits for the user while increasing the driving experience and road safeness.

Greentec Scorpion 430-4 Plus Reach Mower – Front Mounted

The Scorpion 330 & 430 are intended for small tractors, implement carrier, skid steer loaders and the like. The reach mowers are used for roadside maintenance by contractors and hedgerow maintenance by farmers who want to achieve high capacity and efficiency. All you need is a minimum vehicle weight between 1,500 and 2,200 kg (3,300 and 4,850 lb) depending on the model.

Greentec Scorpion 430-4 Plus Reach Mower – Front Mounted

Greentec Scorpion 430-4 S Reach Mower – Front Mounted

The Scorpion 330 & 430 are intended for small tractors, implement carrier, skid steer loaders and the like. The reach mowers are used for roadside maintenance by contractors and hedgerow maintenance by farmers who want to achieve high capacity and efficiency. All you need is a minimum vehicle weight between 2,250 and 3,000 kg (4,960 and 6,614 lb) depending on the model.

Greentec Scorpion 330-4 S Reach Mower – Front Mounted

Greentec Scorpion 430-4 Plus Basic Reach Mower – Front Mounted

The Scorpion 330 & 430 are intended for small tractors, implement carrier, skid steer loaders and the like. The reach mowers are used for roadside maintenance by contractors and hedgerow maintenance by farmers who want to achieve high capacity and efficiency. All you need is a minimum vehicle weight between 2,250 and 3,000 kg (4,960 and 6,614 lb) depending on the model.

Greentec Scorpion 430-4 S Basic Reach Mower – Front Mounted

The Scorpion 330 & 430 are intended for small tractors, implement carrier, skid steer loaders and the like. The reach mowers are used for roadside maintenance by contractors and hedgerow maintenance by farmers who want to achieve high capacity and efficiency. All you need is a minimum vehicle weight between 2,250 and 3,000 kg (4,960 and 6,614 lb) depending on the model.

Greentec Scorpion 330-4 Plus Basic Reach Mower – Front Mounted

The Scorpion 330 & 430 are intended for small tractors, implement carrier, skid steer loaders and the like. The reach mowers are used for roadside maintenance by contractors and hedgerow maintenance by farmers who want to achieve high capacity and efficiency. All you need is a minimum vehicle weight between 2,250 and 3,000 kg (4,960 and 6,614 lb) depending on the model.

Greentec Scorpion 330-4 S Basic Reach Mower – Front Mounted

The Scorpion 330 & 430 are intended for small tractors, implement carrier, skid steer loaders and the like. The reach mowers are used for roadside maintenance by contractors and hedgerow maintenance by farmers who want to achieve high capacity and efficiency. All you need is a minimum vehicle weight between 2,250 and 3,000 kg (4,960 and 6,614 lb) depending on the model.

Greentec Leaf Blower LG

The Leaf Blower LG is used for keeping roads, sidewalks and bike paths free of leaves, grass and other debris. The machine is often used in combination with a hedge trimmer or flail mower. It enables you to cut hedges, shrubs and grass in verges while cleaning up the mess on the fly. It eliminates the need for manual labor to remove the cut-off material from the road.

Niubo Mulcher

The Niubo forestry mulchers offers substantial benefits for farmers engaged in vegetation management. It efficiently clears dense vegetation, simplifying land preparation and maintenance tasks. Safety is enhanced as operators work at a safe distance from mulching activities, reducing the risk of accidents. Versatility allows it to tackle various vegetation types and terrains, making it a valuable tool for diverse farming needs. Improved efficiency translates into potential labor cost savings, boosting overall farm profitability. Some models offer eco-friendly features, like reduced emissions or natural mulching capabilities, which align with sustainable farming practices. Furthermore, effective vegetation mulching reduces the risk of wildfires, enhancing overall farm safety and productivity.

T-MAX MULCHERS

Special mulcher designed for heavy work with pruning residues of up to 12-15 cm diameter, in olive groves, vineyards, fruit orchards, citrus, grass, etc.

NIUBO MACHINERY THUNDER MULCHER SERIES

The feature-packed Thunder mulcher is the ideal choice for medium to large scale orchards and vineyards.

NIUBO MACHINERY ROTARY MULCHER HEAD

Flail mower with flails or hammers with hydraulic motor and rod. Ready to be attached to tool carrier. Oil flow required 30 Ltrs/min (motor) + 12 lt/min (rod).

NIUBO MACHINERY PERFECT MULCHER SERIES

The Perfect is one of the heaviest duty pruning mulchers on the market – making it the ideal choice for large-scale vineyards and orchards, and perfect for contractors.

NIUBO MACHINERY PANTHER PICKER MULCHER

The Panther is the perfect solution for the vineyards or orchards with stony, wed or sandy soil.

NIUBO KBX-L Mulching Head

The KBX-L Hydraulic Forestry Mulching Head, manufactured in Spain by Niubo, is suitable for use with skid steer loaders from 70 – 120CV when mulching any vegetation residue, grass, and branches up to 12cm. Available widths: 140cm, 160cm, and 180cm.

NIUBO KBX-F Mulching Head

The KXP-F Hydraulic Forestry Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators from 12 – 16 tons when mulching any vegetation residue, grass and branches up to 15cm. Available widths: 140cm, 160cm, and 180cm.

KXS-O HYDRAULIC FORESTRY FLAIL HEAD

Hydraulic forestry mulching head for exacavators. Suited for mulching any vegetable residue, grass and branches up to 15 cm diameter.

KRS HYDRAULIC MULCHING HEAD

Hydraulic mulching head for exacavators. Suited for mulching grass or bushes and branches up to 5 cm diameter.

KRP HYDRAULIC MULCHING HEAD

Hydraulic mulching head for mini exacavators. Suited for mulching grass or small bushes up to 2 cm diameter.

FMR – NIUBO Super Top Mulcher

The Super Top, manufactured in Spain by Niubo, is a professional mulcher designed to handle heavy work in orchards, vineyards, olive groves and general scrub up to 15-18cm. Available widths: 160cm, 180cm, 200cm, and 220cm

FMR – NIUBO Super Forest Mulcher

A heavy duty tractor mounted mulcher suitable for forestry use manufactured by our Spanish partner Niubo, the Super Forest handles mulching material up to 35cm. Available widths: 180cm, 200cm, and 220cm

FMR – NIUBO Super Diamond Mulcher

A heavy duty tractor mounted mulcher suitable for forestry use manufactured by our Spanish partner Niubo, the Super Forest handles mulching material up to 30cm. Available widths: 180cm, 200cm, and 220cm

FMR – NIUBO Perfect Plus Mulcher

The Perfect Plus, manufactured in Spain by Niubo, is especially designed with a wide mouth intake to handle heavy work in orchards, vineyards, olive groves and general scrub up to 12-15cm. Available widths: 150cm, 160cm, 180cm, 200cm, 220cm and 250cm

FMR – NIUBO Mini Diamond Mulcher

A heavy duty tractor mounted mulcher suitable for forestry use manufactured by our Spanish partner Niubo, the Mini Diamond handles mulching material up to 20cm. Available widths: 160cm, 180cm and 200cm

FMR – NIUBO Maxum Plus Mulcher

The Maxum Plus, manufactured in Spain by Niubo, is an offset mulcher with a wide intake opening to handle heavy work in orhcards, vineyards, olive groves and general scrub up to 14cm. Available widths: 200cm, 220cm and 250cm

FMR – NIUBO KXP-L Mulching Head

The KXP-L Hydraulic Forestry Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators (12 – 16 tons) when mulching any vegetation residue, grass and branches up to 12cm. Available widths: 100cm, 120cm, and 140cm.

FMR – NIUBO KXP-F Mulching Head

FMR – NIUBO KXM-T Mulching Head

The KXM-T Hydraulic Forestry Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators from 15 – 20 tons when mulching any vegetation residue, grass and branches up to 20cm. Available widths: 100cm, 120cm, and 140cm.

FMR – NIUBO KXM-F Mulching Head

The KXM-F Hydraulic Forestry Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators from 15 – 20 tons when mulching any vegetation residue, grass, branches and tree trunks to 25cm. Available widths: 100cm, 120cm, and 140cm.

FMR – NIUBO KXG-L Mulching Head

The KXG-L Hydraulic Forestry Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators from 18 – 30 tons when mulching any vegetation residue, grass, branches and tree trunks to 30cm. Available widths: 120cm, 140cm, and 160cm.

FMR – NIUBO KXG-F Mulching Head

The KXG-F Hydraulic Forestry Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators from 20 – 35 tons when mulching any vegetation residue, grass, branches and tree trunks to 40cm. Available widths: 120cm, 140cm, and 160cm.

FMR – NIUBO KRS Mulching Head

The KRS Hydraulic Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators (7 – 9 tons) when mulching grass or bushes and branches up to 6cm. Available widths: 80cm, 100cm and 120cm.

FMR – NIUBO KRP Mulching Head

The KRP Hydraulic Mulching Head, manufactured in Spain by Niubo, is suitable for use with mini excavators (2-3 tons) when mulching grass or small bushes up to 2cm. Available widths: 60cm and 80cm.

FMR – NIUBO KRM Mulching Head

The KRM Hydraulic Mulching Head, manufactured in Spain by Niubo, is suitable for use with mini excavators (3.5-5.5 tons) when mulching grass or small bushes and branches up to 4cm. Available widths: 80cm and 100cm.

FMR – NIUBO KRG Mulching Head

The KRG Hydraulic Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators (5.5 – 8 tons) when mulching grass or bushes and branches up to 5cm. Available widths: 80cm, 100cm and 120cm.

FMR – NIUBO KRE Mulching Head

The KRE Hydraulic Mulching Head, manufactured in Spain by Niubo, is suitable for use with excavators (9 – 13 tons) when mulching grass or bushes and branches up to 8cm. Available widths: 100cm, 120cm, 140cm and 160cm.

FMR – NIUBO King Plus Mulcher

The King Plus, manufactured in Spain by Niubo, is a polyvalent mulcher for grass, vine shoots and branches up to 4-5cm. Available widths: 130cm, 150cm, 160cm, 180cm, 200cm, 220cm and 250cm

FMR – NIUBO KBP Mulching Head

The KBP Hydraulic Mulching Head, manufactured in Spain by Niubo, is suitable for use with skid steer loaders from 50 – 90CV when mulching any vegetation residue, grass, and branches up to 5-6cm. Available widths: 130cm, 140cm, 160cm, 180cm, and 200cm.

FMR – NIUBO Diamond Mulcher

A heavy duty tractor mounted mulcher suitable for forestry use manufactured by our Spanish partner Niubo, the Diamond handles mulching material up to 35cm. Available widths: 200cm, 220cm, and 250cm

Greentec Flail Mower FR 112

Our Flail Mowers FR 92 & 112 are highly effective for the care of green areas. They can be used for both grass mowing, hedge cutting and windbreak maintenance. Their core competency is verge mowing of grass and thicket.

Greentec Flail Mower FR 92

Greentec Flail Mower FR 122 VB

The Flail Mower FR 122 VB is based on a standard FR 122 model, which is equipped with a hydraulically driven conveyor belt that throws the cut-off material away from the work area.

Greentec Flail Mower FR 162

The Flail Mower FR 122 & 162 are hydraulic driven and can be mounted on our Scorpion boom mowers for tractors or directly on the arm of diggers. We also offer a large selection of adapters and brackets for excavators and other manufactures of reach mowers.

Orchards

Municipality

Forestry

Agriculture

Vegetation Management Attachments for Farmers & Contractors

Thanks for downloading

Vegetation Management Tools for Farmers

Greentec Quadsaw

Greentec Reach Arms

Niubo Mulcher

Work Smarter.

GET A QUOTE INSTANTLY

Products

About

Latest News