Greentec Cutterbar HS 242

Greentec Cutterbar HS 242

The HS series consists of hydraulic hedge cutter bars with working widths from 1.7 to 2.4 m (5’7” to 7’10”). The HS 172 – 242 differs from our other models of finger bar cutters as it can be used for both hedge cutting and windbreak maintenance. Branches up to 6 cm (2.36”) in thickness are cut with ease and high velocity as you can maintain a driving speed of 5 km/h (3.11 mph) which is in line with our Quadsaw LRS series. By combining the newly developed finger bars with the specially sharpened blades, you achieve a high performance and an impeccable finish.

Name(Required)
Address(Required)
This field is for validation purposes and should be left unchanged.

Thanks for downloading

Before your download begins, please fill out the form below.

STRONG ARGUMENTS:

  • Perfect cutting quality of branches and twigs
  • Special finger bars for gentle cutting
  • Double-sharpened blades
  • Quick replacement of blades
  • HD planetary gearbox with cast iron engine

The Cutterbar HS 172 – 242 has working widths from 1.7 to 2.4 m (5’7″ to 7’10”)The Cutterbar HS 172 – 242 can cut branches up to 6 cm (2.36″) in thicknessThe Cutterbar HS 172 – 242 has a maximal driving speed of 5 km/h (3.11 mph)The Cutterbar HS 172, 212 and 242 weigh 120, 132 and 145 kg (265, 291 and 320 lb), respectively

Hydraulic hedge cutter bars for excavators and tractors

The HS series consists of hydraulic hedge cutter bars with working widths from 1.7 to 2.4 m (5’7” to 7’10”). The HS 172 – 242 differs from our other models of finger bar cutters as it can be used for both hedge cutting and windbreak maintenance. Branches up to 6 cm (2.36”) in thickness are cut with ease and high velocity as you can maintain a driving speed of 5 km/h (3.11 mph) which is in line with our Quadsaw LRS series. By combining the newly developed finger bars with the specially sharpened blades, you achieve a high performance and an impeccable finish.

On one side, the specially shaped fingers have teeth that keep the branches in the cutting area. On the other side, the fingers are smooth which avoid unnecessary damage to the branches.

The Cutterbar HS 172 – 242 can be mounted on most vehicles as they have a low weight from 120 to 145 kg (265 to 320 lb). The HS 172 is designed for smaller vehicles, such as mini excavators, skid steer loaders and compact tractors which can deliver at least 40 liters of oil per minute (10.6 gpm). The HS 212 & 242 require a minimum of 50 liters of oil per minute (13.2 gpm) and can be fitted on large tractors, loaders and diggers. The hydraulic hedge cutter bars are mounted either directly on the arm of excavators or on tractors and loaders through our Multi Carrier HXF attachment frame or Scorpion reach arms.

The Cutterbar HS series fits the following GreenTec machines:

HS 172 HS 212 HS 242
Multi Carrier HXF 2302
HXF 2802 Check mark
HXF 3302 Check mark Check mark Check mark
Boom Mower Scorpion 330 & 430 Check mark
Scorpion 530 & 630 Check mark Check mark
Scorpion 730 & 830 Check mark Check mark

TECHNICAL DATA HS 172 HS 212 HS 242
Working width 1.7 m
(5’7″) 2.1 m
(6’11”) 2.4 m
(7’10”)
Branch thickness 6 cm
(2.36″) 6 cm
(2.36″) 6 cm
(2.36″)
Driving speed up to 5 km/h
(3.11 mph) 5 km/h
​(3.11 mph) 5 km/h
​(3.11 mph)
Required hydraulic connections 1 x double acting 1 x double acting 1 x double acting
Required oil flow 40 l/min @ 190 bar
(10.6 gpm @ 2756 psi) 50 l/min @ 190 bar
(13.2 gpm @ 2756 psi) 50 l/min @ 190 bar
(13.2 gpm @ 2756 psi)
Weight 120 kg
(265 lb) 132 kg
(291 lb) 145 kg
(320 lb)

EQUIPMENT OVERVIEW

  • High-performance gearbox Standard equipment
  • Quick replaceable blades Standard equipment
  • Double-sharpened blades Standard equipment
  • Plastic guiding of the cutterbar Standard equipment
  • Special finger bars for gentle cutting Standard equipment
  • Hydraulic quick release Optional equipment
  • Mechanical quick release Optional equipment

Standard equipment = Standard equipment

Optional equipment = Optional equipment

Specifications