Inter Row Trimmer VTR2 – Hydralada
Inter Row Trimmer VTR2 – Hydralada
Trim two half rows in one pass
The Hydralada Inter Row VTR2 Trimmer has a single mast with two vertical cutter boards and two rotary toppers trimming two half rows in one pass.
Rotary Blade
Unique design sucks and cuts
Rotary blade creates suction, drawing leaves into trimmer. Vertical cutter board is pivoted at top, leaving clear throat for trimmed foliage to fall to ground.
Rotary Topper
Ejects trimmings away from vine
Available in Tri Star Flail, Evoludisc Flail or Twin Rotary. All options have been specially designed and are effective for trimming and removing the vegetation into adjacent rows.
Frame
Heavy duty and adjustable
Single mast frame can be adjusted and adapted to suit different vineyards. Two vertical cutter boards can be adjusted and toppers moved independent
Additional information
| Twin Cutter Board Length | 1.80m |
|---|---|
| Rotary Topper Diameter | 700mm |
| Trimming Speed | 9kmh |
| Tractor Oil Supply Required | 20lpm, 2000psi, Dual Tractor Auxiliary Oil Remote Outlets |
| Trimmer Boards | 2 x Vertical Trimmer Boards, Rotary Blades x 10 (5 per board), Heavy Duty Spindles, Heavy Duty Bearings, Belt Drive, Rigid Board |
| Frame | Single Mast, Heavy duty headstock with nylon bush inserts, Breakaway system |
Related products
Jadan Verti-Stack
The VertiStack will significantly reduce the time it takes to pack up large square bales. In return, labour and fuel costs are greatly reduced. Over the years Jadan has done different studies on the time it takes to pick bale in the field. The VerticStack from Jadan has cut the bale handling time to less than half over traditional accumulation methods. The neat stacks of bales make for faster handling. For the first time in industry history the loader operator does not come to a complete stop to pick up the stack of bales but merely slows down to grab the stack of bales with a standard big bale spear. Jadan has also designed a bale spear to complement the stacks of bales and is designed for the strength of hay loaders and telehandlers.
-
Kerfab – Telehandler Square Bale Fork Adjustable
The Telehandler Square Bale Fork allows for safe handling of individual or multiple round or square bales. This fork is fully adjustable and is ideal for stacking in sheds or hay stockpiles. To top it all off the telehandler square bale fork has manual and hydraulic adjustable back frames available. With adjustable fork tines you're sure to get the job done efficiently! The bale fork has the ability to have up to 5 fork tines on the attachment ensuring optimal use of your adjustable bale fork.
-
Major Alpine Contractor LGP Tankers
The Alpine tanker design is based on the contractor LGP specification, but with a dropped axle to give a low centre of gravity. This results in less ground pressure than standard axle tankers and minimal ground damage even in wet conditions. There are three sizes available: 2150, 2300 and 2670 Gallons. As with all MAJOR tankers, the inside is baffled to prevent wave motions and improve operator safety. Industrial specification axle Hydraulic braking system Removable footing Vessel fully reinforced inside to compensate for wheel arches Primary and secondary traps to protect pump Rubber buffer suspension drawbar Swivel hitch and foldable PTO stand Full road lighting kit Painted finish as standard. A galvanised finish is available as an optional extra. Download Brochure Product Specifications Product Video
-
Jadan Big Bale Stacker
FEATURES Adjustable drawbar height to suit different tractors Powder coated finish Will carry: 6 3x3 squares, 6 4x3 squares & 4 4x4 square Robust Simple Design Unique plastic covered tray to assist hay sliding on the bed built in australia to suit Australian conditions will pick up bales in any direction OPTIONAL EXTRAS Bale Counter Mud Guards Tail Lights Wet Bale Kit Mud Guards Wet Bale Kit
