HXF Multi Carrier – Greentec
HXF Multi Carrier – Greentec
The GreenTec Multi Carrier series is a flexible mounting solution with a world of attachment tools available. Designed for orchard management, hedge cutting, mowing under fences and weed clearance.
Skid steer loaders, compact tractors, front end loaders, telehandlers, excavators, diggers, and other types of loaders can all carry a Multi Carrier HXF boom arm. The only requirement is that the vehicle can deliver between 25-50 litres of oil per minute, depending on the size of the Multi Carrier and attachment tool.
Simply couple this tool with a Greentec Quadsaw for an efficient & powerful pruning device.
Or request a quote now.
Additional information
| Model | 2302, 2802, 3302 |
|---|
Related products
Kerfab – Telehandler Light Materials Bucket
Our Telehandler Light Materials Buckets are built to withstand harsh punishment while offering maximum capacity. They are ideal for handling bulk amounts of grain, mulch, and other materials less than 800kg/m3 density. The large capacity of this bucket helps to increase efficiency and increase ROI. This attachment is quick hitch compatible
Kerfab – Medium Duty High Dump Bucket
Our High Dump Buckets are specially designed to gain extra height where lift of the machine is limited and improve lift and load cycle times. Complete with a hardened wear edge, rubber bump stops, hydraulic check control valve, self-lubing, replaceable pivot bushes for extra durability and reduced maintenance. This bucket will suit a range of applications from grain handling to waste management.
Major Flex Wing Topper Series
The MAJOR Flex Wing Topper is a three point linkage?mounted machine which folds up to 2.3m (7' 6'') transport width. Like all MAJOR machines, the Flex Wing Topper is of robust construction. CE conformity is achieved through full PTO guarding and heavy rubber skirting to prevent debris from escaping. The wing cutting decks are raised by hydraulic control to transport position. The wings are capable of flexing from -15 to +25 degrees allowing the cutting unit to follow the ground contours. Contra-rotating swinging blades are retained in hardened steel bushings and clamped by sprung steel blade backs. Under-sole discs are fitted to prevent scalping and ensure a perfect finish every time. Robust pivot points Rubber shock absorbers Slip clutch PTO protection Hydraulic wing lift ProCut swinging blades 88mm (3 1/2') blade overlap to eliminate striping Download Brochure Product Specifications Product Video
Kerfab – Rehandling Bucket
A versatile bucket designed for use handling bulk loads of waste and recycling refuse and materials over 800kg/m3 density. Constructed from high tensile steel, the Rehandling Bucket comes with extra wear pads on the underside for longevity. This bucket is a versatile attachment that is built to last, it also comes with the option of a bolt on edge. The Rehandling Bucket is Quick Hitch compatible
