HM-500-T Hydroseeder – Turbo Turf
The Turbo Turf HM-500-T is an ideal hydroseeder for those who need to spray difficult materials and heavy slurries. The HM-500-T will play with even the most difficult materials and make the hardest job a snap. The aggressive paddle agitation allows you to load full bales without the need to break them up. The positive displacement Bowie gear pump allows you to spray thick slurries of any hydro seeding or erosion control mulch through up to 150 metres of hose.
Never worry about rust again. Turbo Turf’s poly tank can never rust. While others scrape, sand and recoat their metal tank units you can be doing more productive things. The HM-500-T hydroseeder is designed so that the rugged poly tank serves only as a carrier for the slurry. All moving parts are supported by heavy structural steel which has no contact with the fluids. Turbo Turf’s mixing system is made to last and to have the lowest maintenance requirements of any unit on the market.The Turbo Turf HM-500-T hydroseeder is the best value in the industry with standard features like the front loading and spraying platform, the ability to draw water from a pond or stream (suction hose not included). These standard features add thousands of dollars to competitive units. The Turbo Turf HM-500-T features the best performance and best value in the industry.Many in the industry saw the concept of a paddle (mechanically agitated) hydroseeder using a “PLASTIC” tank as having great potential. Early attempts by others involved hanging a bearing on the plastic tank and this approach did not work well. Turbo Turf took a whole new approach. The bearings and agitator shaft are supported completely by heavy structural steel supports and the tank is used for nothing but holding the material. There is no stress whatsoever on the tank and the entire mixing system would run without the tank even being present.This system has now been on the market for several years without a single failure. The system is so reliable that Turbo Turf has introduced a 20 year pro rated tank warranty on mechanical units such as the HM-500-T.
Features & Benefits
✓ Seed 600Sqm per load.
✓ Long Life Poly Tank, No Rust & Light Tare Weight.
✓ More pressure control for great trimming.
✓ Molded in bale tray makes loading easy.
✓ Aggressive paddle agitation.
✓ Ability to handle the toughest erosion control materials inculding Flexterra.
✓ Few moving parts and low maintenance.
✓ Easy to run. Only one person required.
Manual rewind hose reel that will hold 55 metres of 1 1/4 inch hose or 45 metres of 1 1/2″ hose.
Electric rewind hose reel that will hold 55 metres of 1 1/4 inch hose or 45 metres of 1 1/2″ hose.
50 gallon (190 Litre) flush tank allows you to clean the hose with water from the flush tank.
Hose extensions variable upon request.
Fill hose, Gives you the ability to self fill the hydroseeder
View all Hydroseeders
HM-500-TE (Electric Start), HM-500-TR (Recoil Start)
500 Gallons (1900 Litres)
13 H.P. Honda with recoil or electric start
2300 series Bowie positive displacement gear pump
1.72m (w) x 2.9m (L) x 2.29 (h)
Tare 685kg, Loaded Weight 2315kg