Half Row Trimmer VTR1 – Hydralada
Half Row Trimmer VTR1 – Hydralada
Single Mast Design
Single mast design, 1.80m vertical cutter board, five rotary blades, topper assembly.
Rotary Blade
Unique design sucks and cuts
Rotary blade creates suction, drawing leaves into trimmer. Vertical cutter board is pivoted at top, leaving clear throat for trimmed foliage to fall to ground.
Rotary Topper
Ejects trimmings away from vine
Available in Tri Star Flail, Evoludisc Flail, or Twin Rotary. All options are specially designed and effective for trimming and removing vegetation into adjacent rows.
Frame
Heavy duty and adjustable
Dual mast robust frame can be adjusted to suit vineyards. Adjustable cutter boards. Toppers move independently. Each side includes swing breakaway system.
Additional information
| Twin Cutter Board Length | 1.80m |
|---|---|
| Rotary Topper Diameter | 700mm |
| Trimming Speed | 10 Kmh |
| Tractor Oil Supply Required | 20lpm, 2000psi, Dual Tractor Auxiliary Oil Remote Outlets, 3 Station Joystick Remote Control Station |
| Trimmer Boards | 2 x Vertical Trimmer Boards, Rotary Blades x 10 (5 per board), Heavy Duty Spindles, Heavy Duty Bearings, Belt Drive, Rigid Board |
| Frame | Dual Mast, Heavy duty headstock with nylon bush inserts, Breakaway system |
Related products
Jadan Verti-Stack
The VertiStack will significantly reduce the time it takes to pack up large square bales. In return, labour and fuel costs are greatly reduced. Over the years Jadan has done different studies on the time it takes to pick bale in the field. The VerticStack from Jadan has cut the bale handling time to less than half over traditional accumulation methods. The neat stacks of bales make for faster handling. For the first time in industry history the loader operator does not come to a complete stop to pick up the stack of bales but merely slows down to grab the stack of bales with a standard big bale spear. Jadan has also designed a bale spear to complement the stacks of bales and is designed for the strength of hay loaders and telehandlers.
-
Kerfab – Medium Duty High Dump Bucket
Our High Dump Buckets are specially designed to gain extra height where lift of the machine is limited and improve lift and load cycle times. Complete with a hardened wear edge, rubber bump stops, hydraulic check control valve, self-lubing, replaceable pivot bushes for extra durability and reduced maintenance. This bucket will suit a range of applications from grain handling to waste management.
-
Major Alpine Contractor LGP Tankers
The Alpine tanker design is based on the contractor LGP specification, but with a dropped axle to give a low centre of gravity. This results in less ground pressure than standard axle tankers and minimal ground damage even in wet conditions. There are three sizes available: 2150, 2300 and 2670 Gallons. As with all MAJOR tankers, the inside is baffled to prevent wave motions and improve operator safety. Industrial specification axle Hydraulic braking system Removable footing Vessel fully reinforced inside to compensate for wheel arches Primary and secondary traps to protect pump Rubber buffer suspension drawbar Swivel hitch and foldable PTO stand Full road lighting kit Painted finish as standard. A galvanised finish is available as an optional extra. Download Brochure Product Specifications Product Video
-
Kerfab – Telehandler GP Bucket
Specially designed with a hardened wear edge, the telehandler GP bucket is built for the tough jobs. Available with a bolt on edge option and the ability to be fitted to any telehandler hitch brackets, this classic bucket sure to make light work of cleaning up on building sites, handling rubble, sand and soil yards.This attachment is quick hitch compatible.
